Commercial dryer service across San Diego County since 2016. Speed Queen ST series, Maytag Commercial MD series, Whirlpool Commercial, UniMac UT/UW, Huebsch, and Continental Girbau — laundromats, hotels, hospitals, apartment laundry rooms, schools, and gyms. Pressure-tested gas-line work, blower motor and lint-vent service, ignition module and thermostat replacement. Flat $80 diagnostic credited to the repair. 90-day parts and labor warranty.
Laundromats, hotels, hospitals, apartment laundry rooms, schools, and gyms across San Diego County depend on commercial dryers running through high-volume cycles. Even short downtime backs up the entire laundry workflow. We service Speed Queen, Maytag Commercial, Whirlpool Commercial, UniMac, Huebsch, and Continental Girbau — gas-line pressure-tested, NFPA 25-compliant lint-vent service, OEM igniter and element replacement.
Six reasons restaurants, hotels, caterers, and food-service operators across San Diego County book Spark over national franchise dispatchers.
We service Speed Queen, Maytag Commercial, Whirlpool Commercial, UniMac, Huebsch every week across San Diego County restaurants, hotels, and food-service businesses. OEM parts on every truck for one-visit repairs.
Required for any commercial refrigeration sealed-system work — refrigerant recovery, leak repair, recharge to spec. Yurii holds Type I; full EPA-compliant equipment on every truck.
$80 service-call fee credited to the repair when you authorize the work. No hourly markups, no "we'll call back with the estimate" delays. Quote is written, fixed-price, and provided before work starts.
Calls before noon get same-day visits. After-hours and weekend service by appointment for hotels, hospitals, and 24/7 operations. Single point of contact for multi-location chains.
Every commercial repair backed 90 days on both parts and labor. Same fault returns, we come back at no charge. Standard on every job — not an add-on, not a haggle.
California Bureau of Household Goods and Services Registration #C 62399. Commercial liability insurance certificate on file — available for property managers, franchises, hotels, and HOA-managed properties on request.
Eight repairs we diagnose most weeks across San Diego County — OEM parts on the truck, fixed-price quote before any work begins, EPA 608 Type I where sealed-system service is required.
Speed Queen ST gas dryer igniter and ignition module failure — OEM Speed Queen ignition assembly + gas valve verification. $320–$640.
Maytag Commercial MD electric dryer heating element burnout — OEM element replacement, terminal block inspection. $280–$540.
Whirlpool Commercial coin-op dryer drum belt and idler pulley wear — OEM belt + idler kit, drum bearing inspection. $280–$520.
UniMac UT and UW drum bearing failure — squealing, vibration. OEM bearing kit replacement, drum runout test. $420–$880.
Huebsch coin-op coin slide and card reader service — payment electronics, slide alignment, OEM parts. $220–$480.
Continental Girbau tumbler thermostat, blower motor, and gas valve service for high-volume hotel/hospital laundry rooms. $420–$880.
Lint vent inspection and cleaning to NFPA 25 standards — critical for fire safety in commercial laundry rooms, hotels, and hospitals. $220–$520.
Multi-dryer diagnostic visit for laundromats and hotel laundry rooms — full bank inspection, recommended repairs prioritized by downtime risk. $220 base + per-unit work.
Primary commercial brands — OEM parts stocked on every truck for one-visit repairs:
Secondary brands serviced — OEM parts ordered same-day from local suppliers:
Many San Diego restaurant owners and property managers also rely on Spark for residential high-end brands at their homes and HOA-managed properties — Maytag, Whirlpool, Electrolux, Samsung, and LG service available with the same EPA 608 certified technicians.
Four steps from the call to the repair. Single dispatch desk, single tech, single invoice.
Reach us at (619) 330-5105. We confirm your dryer type (coin laundromat / OPL hotel-hospital / fitness-club towel service), brand (Speed Queen / Huebsch / Maytag Commercial / IPSO / Continental Girbau), drum size (30-lb / 50-lb / 60-lb / 75-lb), fuel type (natural gas / propane / electric), and any high-temp limit trips or lint-trap warnings — so the tech rolls with the right igniter, gas valve, and anemometer.
Tech dispatched from Spring Valley HQ with anemometer for vent airflow verification, OEM igniter modules, gas-valve solenoids, high-limit thermostats (200°F/250°F), and lint-trap collection-chamber tools. NFPA 96 compliance documentation kit on every commercial dryer call.
Flat $80 diagnostic. Lint-and-airflow inspection mandatory on every commercial dryer service (CPSC fire-risk #1) — anemometer reading at outlet, photo-doc of dryer-to-vent transition, roof-vent termination check. Gas-valve and burner pressure verified at 7" WC manifold (NG) / 11" WC (propane). Written, fixed-price quote before any work begins.
OEM parts from the truck where stocked, ordered same-day where not. Post-repair vent-airflow verification with anemometer (target >1,200 CFM for 50/60-lb units, >1,400 CFM for 75-lb) — written reading provided for your NFPA 96 facility file. 90-day parts & labor warranty.
Most commercial dryer repairs run $220–$1,890 depending on parts and complexity. The flat $80 diagnostic is the same rate everywhere we go — credited to the repair when you authorize the work. Every quote fixed-price, not hourly.
Lint-trap clean, drive belt, single thermostat, igniter glow plug, door switch: $220–$540. Most weekly preventive on Speed Queen and Huebsch coin-laundromat units, Maytag Commercial drum service, vent-path lint cleanout with photo-doc.
Gas-valve solenoid, high-limit thermostat replacement, OEM control boards, blower motor, drum-bearing kits: $340–$880. Common on 50/60/75-lb commercial dryers running 8–14 hours daily — IPSO and Continental Girbau OPL drum-bearing service, Speed Queen Quantum control panel, Maytag MDG-Series gas-valve.
Heavy gas-train work, full burner-and-thermocouple replacement, multi-dryer vent-stack cleaning + airflow rebalance, networked OPL control panel rebuild: $640–$1,890. Permitted gas-line coordination, hotel/hospital OPL annual service, full multi-unit airflow audit per NFPA 96.
Every quote is written, fixed-price (not hourly), and provided before any work begins. The flat $80 diagnostic is credited to the repair the moment you authorize the job.
Eight questions San Diego operators ask us most often — dispatch speed, EPA 608 certification, brand coverage, multi-location dispatch.
Flat $80 diagnostic credited to the repair, 90-day parts and labor warranty, EPA 608 Type I certified, licensed and insured by the California Bureau of Household Goods and Services (#C 62399). Call our commercial line or book online — same-day for urgent dispatch, after-hours by appointment.
Below are typical price ranges for common repairs. Final cost depends on brand, model, and parts availability. Call us at (619) 330-5105 for a free upfront estimate.
| Repair Type | Typical Cost |
|---|---|
| Heating Element / Igniter | $250 – $320 |
| Drum Belt Replacement | $250 – $280 |
| Control Board Replacement | $280 – $450 |
| Gas Valve / Burner Repair | $250 – $380 |
| Motor Replacement | $280 – $440 |
| Thermostat / Thermal Fuse | $250 – $280 |
| Drum Bearing Replacement | $250 – $340 |
* Estimates for San Diego County. Prices may vary by appliance brand and model.
Spark Appliance Repair provides Commercial Dryer Repair across San Diego County: San Diego, Spring Valley, El Cajon, Chula Vista, Coronado, Del Mar, La Jolla, La Mesa, Mira Mesa, Poway, and surrounding areas.
Services
© 2001 – 2026 SPARK Appliance Repair. All Right Reserved.
