B2B-focused commercial washer service across San Diego County. Family-owned since 2016, licensed by California (BHGS #C 62399), EPA 608 Type I certified for sealed-system work on chiller-equipped washers, BBB Accredited Business. Four in-house technicians (Yurii, Alex, Andrew, Paul) — no contractors, no out-of-state dispatch. Calls received before noon get same-day visits across SD County. Flat $80 diagnostic credited to the repair. 90-day parts-and-labor warranty. Licensed and insured with COI on file for property managers and franchises.
Commercial washer service is fundamentally different from residential — duty cycles are 10-30× higher, downtime translates directly to lost revenue, and warranty terms must hold up under continuous use. We focus on these B2B segments across San Diego County:
Six reasons San Diego laundromat owners, hotel facility managers, and multi-family property managers call us first when a commercial washer goes down.
We service Speed Queen, Wascomat, Continental Girbau, UniMac, Huebsch, IPSO, and Dexter every week across San Diego County. Front-load soft-mount bearing rebuilds, top-load drum bearing, drive belt, motor coupling, water inlet valve, and drain pump diagnostics — we know each platform.
Required for any sealed-system work on chiller-equipped washers (some healthcare and pharmaceutical laundry units). Refrigerant recovery, leak detection, recharge — done right, documented for compliance audits.
$80 service-call fee credited to the repair when you authorize the work. No hourly markups, no commercial surcharge, no surprise charges. Written quote before any part is ordered.
Calls received before noon get same-day visits. After-hours and weekend service available by appointment for laundromats and multi-family operators — downtime cost is real, we get it.
Every commercial repair backed 90 days on both parts and labor. Same fault returns within 90 days, we come back at no charge. No commercial exclusions, no fine print — same warranty as residential.
California Bureau of Household Goods and Services Registration #C 62399. Commercial liability insurance certificate on file — available for property managers, hotels, hospitals, and HOA-managed properties on request.
Eight repairs we run weekly across San Diego County commercial laundry. Listed by brand and model family — these are the failures that take a laundromat washer or hotel housekeeping unit out of service most often.
Speed Queen TR3 / TR5 / TC5 top-load drum bearing replacement — front bearing wear from continuous laundromat duty. We carry OEM Speed Queen bearing kits + factory tooling for press fit. Typical repair: $400-$680.
Speed Queen SC30 / SF40 / SY60 soft-mount front-load main bearing rebuild. Symptom: high-pitch noise during spin, water leak from rear seal. Full bearing pack rebuild includes seal replacement. Typical: $750-$1,200.
Wascomat W620 / W640 / W730 drain pump impeller failure and electronic door lock relay diagnosis. Common laundromat downtime cause — we diagnose pump vs. door interlock vs. control board. Typical: $300-$520.
Continental Girbau EH / EV water inlet valve replacement, water pressure regulator service, and detergent supply solenoid diagnostics. Typical: $280-$420.
UniMac UC50 / UH35 hospital and hotel soft-mount front-load bearing pack replacement. We carry OEM Alliance bearing kits. Includes seal replacement, drum balance recheck, and OSHA-compliant lockout-tagout documentation for healthcare clients. Typical: $850-$1,400.
Huebsch HC30 / HC40 control board failure diagnosis vs. wiring harness vs. user-interface PCB. Pre-purchase diagnostic confirms exact failed component before $300 board order. Typical: $400-$720.
Maytag MAH22 / MAH55 commercial-line drive belt replacement and motor coupling rebuild. Common multi-family laundry room repair. We stock OEM Whirlpool / Maytag belts and couplings. Typical: $250-$420.
Dexter T300 / T350 / T400 / T600 transmission inspection, oil seal replacement, and bearing service. Major service typically deferred until 8+ years of duty — we provide repair-vs-replace cost analysis honestly. Typical major: $1,100-$1,800.
Primary commercial washer brands serviced weekly:
Secondary brands also serviced:
Property managers and laundromat owners often need residential service too — for on-site managers, employee residences, or HOA-managed homes. Our same EPA 608 certified technicians handle Whirlpool, LG, Samsung, Maytag, and Speed Queen residential lines with the same 90-day warranty.
Four steps from the call to the 90-day warranty. No call-center transfers, no "we'll get back to you next week" dispatchers — direct line to the team that arrives at your laundromat or hotel.
Reach us at (619) 330-5105 or via the online booking link. We confirm your business name, location, machine make/model, and symptoms. Property managers can request a service-area map and COI in advance.
Tech dispatched from Spring Valley HQ. Most San Diego County commercial laundry rooms reached in 30-90 minutes. Calls before noon = same-day. After-hours and weekend service available by appointment.
Flat $80 diagnostic. Written, fixed-price quote before any work begins. EPA 608 Type I diagnostics where chillers are involved. We document failure root cause for property manager records.
OEM parts from the truck where stocked, ordered same-day where not. 90-day warranty on parts and labor. Same fault returns, we come back at no charge.
Most commercial washer repairs fall into one of three price bands. Final price depends on brand, model age, parts needed, and whether sealed-system work is required.
Drive belts, motor couplings, water inlet valves, drain pumps, door interlocks, lid switches, drive motor relay, control board diagnosis. Includes labor + OEM parts + 90-day warranty.
Top-load drum bearing replacement, soft-mount control board replacement, motor coupling + transmission seal, electronic coin/card mechanism diagnosis. Includes labor + OEM parts + 90-day warranty.
Front-load soft-mount full bearing pack rebuild (UniMac, Speed Queen SC/SF, Continental Girbau), Dexter transmission service, sealed-system work on chiller-equipped washers (EPA 608 required). Includes labor + OEM parts + 90-day warranty + compliance documentation.
Repair vs. Replace: If repair cost exceeds 60% of new-unit replacement and the machine is more than 12 years old, replacement may make more sense. We give you both numbers honestly before you authorize work — and the $80 diagnostic is credited to the repair when we proceed.
Eight questions San Diego laundromat owners, hotel facility managers, and multi-family operators ask before booking commercial washer service.
Flat $80 diagnostic credited to the repair, 90-day parts and labor warranty, licensed and insured by California BHGS (#C 62399), EPA 608 Type I certified. Call now, or book online in 90 seconds.
Below are typical price ranges for common repairs. Final cost depends on brand, model, and parts availability. Call us at (619) 330-5105 for a free upfront estimate.
| Repair Type | Typical Cost |
|---|---|
| Water Pump Replacement | $250 – $380 |
| Control Board Replacement | $280 – $460 |
| Door Lock / Seal Repair | $250 – $320 |
| Drum / Bearing Replacement | $280 – $440 |
| Water Inlet Valve | $250 – $300 |
| Motor Replacement | $300 – $480 |
| Drain System Repair | $250 – $340 |
* Estimates for San Diego County. Prices may vary by appliance brand and model.
Spark Appliance Repair provides Commercial Washer Repair across San Diego County: San Diego, Spring Valley, El Cajon, Chula Vista, Coronado, Del Mar, La Jolla, La Mesa, Mira Mesa, Poway, and surrounding areas.
Services
© 2001 – 2026 SPARK Appliance Repair. All Right Reserved.
